Table of Contents
Advertisement
106 Connectivity
list. If the connection to the manually selected network is lost, the device sounds
an error tone and asks you to reselect a network. The selected network must have
a roaming agreement with your home network.
Cell info display — Set the device to indicate when it is used in a cellular network
based on microcellular network (MCN) technology and to activate cell info reception.
Access points
Create a new access point
Select
Menu
Settings
>
You may receive access point settings in a message from a service provider. Some
or all access points may be preset for your device by your service provider, and you
may not be able to change, create, edit, or remove them.
When you open one of the access point groups (
point types:
indicates a protected access point
indicates a packet data access point
To create a new access point, select
The device asks to check for available connections. After the search, connections
that are already available are shown and can be shared by a new access point.
If you skip this step, you are asked to select a connection method and to define the
settings needed.
To edit the settings of an access point, open one of the access point groups, and
select an access point. Follow the instructions from your service provider.
Connection name — Enter a name for the connection.
Data bearer — Select the data connection type.
and
Connectivity
Access
> Destinations.
,
,
), you can see the access
point.
Advertisement
Table of Contents
