Table of Contents
Advertisement
To make an emergency call:
1
If the device is not on, switch it on. Check for adequate signal strength. Depending on your device, you may also
need to complete the following:
Insert a SIM card if your device uses one.
•
Remove certain call restrictions you have activated in your device.
•
Change your profile from offline profile mode to an active profile.
•
If the screen and keys are locked, slide the lock switch on the side of the device to unlock them.
•
2
Press the end key as many times as needed to clear the display and ready the device for calls.
3
To open the dialler, select
4
Enter the official emergency number for your present location. Emergency numbers vary by location.
5
Press the call key.
When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may
be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.
Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves.
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines were developed by the independent scientific organisation
ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR.
The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR
are conducted using standard operating positions with the device transmitting at its highest certified power level in all
tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device
is designed to use only the power required to reach the network. That amount changes depending on a number of factors
such as how close you are to a network base station.
The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 1.04 W/kg.
Use of device accessories may result in different SAR values. SAR values may vary depending on national reporting and
testing requirements and the network band. Additional SAR information may be provided under product information at
www.nokia.com.
Telephone
or
.
Product and safety information 147
Advertisement
Table of Contents
