Table of Contents
Advertisement
6
Managing power
Your computer can operate on either battery power or external power. When the computer is running
on battery power only and an AC power source is not available to charge the battery, it is important to
monitor and conserve the battery charge. Your computer supports an optimal power plan to manage
how your computer uses and conserves power so that computer performance is balanced with power
conservation.
Initiating Sleep and Hibernation
Microsoft® Windows has two power-saving states, Sleep and Hibernation.
Sleep—The Sleep state is automatically initiated after a period of inactivity when running on
●
battery power or on external power. Your work is saved to memory, allowing you to resume your
work very quickly. You can also initiate Sleep manually. For more information, see
initiating and exiting Sleep on page
Hibernation—The Hibernation state is automatically initiated if the battery reaches a critical level.
●
In the Hibernation state, your work is saved to a hibernation file and the computer powers down.
NOTE:
on page 39
CAUTION:
playback functionality, or loss of information, do not initiate Sleep while reading from or writing to a
disc or an external media card.
NOTE:
You cannot initiate any type of networking connection or perform any computer functions
while the computer is in the Sleep state or in Hibernation.
Intel Rapid Start Technology (select models only)
For select models, the Intel Rapid Start Technology (RST) feature is enabled by default. Rapid Start
Technology allows your computer to resume quickly from inactivity.
Rapid Start Technology manages your power-saving options as follows:
Sleep—Rapid Start Technology allows you to select the Sleep state. To exit from Sleep, press
●
any key, activate the TouchPad, or briefly press the power button.
Hibernation—Rapid Start Technology initiates Hibernation after a period of computer inactivity
●
while the computer is in the Sleep state or when the battery reaches a critical level. After
Hibernation is initiated, press the power button to resume your work.
NOTE:
Rapid Start Technology can be disabled in Setup Utility (BIOS). If you want to be able to
initiate Hibernation yourself, you must enable user-initiated Hibernation using Power Options. See
Manually initiating and exiting Hibernation (select models only) on page
Manually initiating and exiting Sleep
You can initiate Sleep in any of the following ways:
You can manually initiate Hibernation. See
and
Manually initiating and exiting Hibernation (select models only) on page
To reduce the risk of possible audio and video degradation, loss of audio or video
39.
Manually initiating and exiting Sleep
Manually
40.
Initiating Sleep and Hibernation
40.
39
Advertisement
Table of Contents
