TP-Link TD-W9970 Quick Installation Manual

Quick
Installation Guide
300Mbps Wireless N USB VDSL/ADSL Modem Router
TD-W9970/TD-W9970B
*TD-W9970 is used for demonstration in this QIG.
2. Configuring the Modem Router
1
Connect your computer to the modem router (Wired or Wireless).
Wired
WPS/
VDSL LAN4/WAN LAN3 LAN2 LAN1 USB WiFi ON/OFF POWER
RESET
2
Open a web browser on the computer and configure the modem router according to the following main clues.
a
Enter http://tplinkmodem.net or http://192.168.1.1
in the address bar. Type in admin for both the
username and password and click Login.
Note: If the login window does not appear, please refer to
FAQ->Q1.
http://tplinkmodem.net
admin
admin
Login
d
Enter the parameters provided by your ISP and then
click Next. Here we take PPPoE as an example.
Quick Setup-PPPoE
Auto-detection has succeeded!
DSL PVC:
8/35
Encapsulation Mode: LLC
Connection Type: PPPoE
User name:
XXXXXX
Password: XXXXXX
Confirm Password: XXXXXX
Back
g
Click Save and wait for your settings to
take effect. Click Finish to complete
the setup.
Quick Setup-Complete
Time Zone Configuring: Success
Operation Mode Configuring: Success
WAN Connection Configuring: Success
3G/4G Connection Configuring: Success
Gateway and DNS Configuring: Success
Wireless Configuring: Success
Finish
7106506058
Ethernet cable
b
Click Next to start Quick Setup, and select your Region
and Time Zone from the drop-down list. Then click Next.
Quick Setup-Region and Time Zone
Region
Time Zone
e
Click Next to continue.
Note: You may enable 3G/4G as a backup method for Internet access.
Quick Setup-3G/4G
Enable 3G/4G as a backup solution for Internet access.
Next
Enjoy!
Now your wired and wireless devices
can connect to the Internet !
Note: If you have changed your
wireless network name and password,
you must sign in with the new
names/passwords to regain access to
the Internet.
1. Connecting the Hardware
1
Connect the splitter and power adapter as follows. Press the ON/OFF button and the
Power LED
Phone Jack
Note: If you don't need the phone service, just directly connect the VDSL port to the Phone Jack with a phone cable.
2
Check the Power and DSL LED lights to ensure the hardware connection is correct.
Notes:
Please wait 1-2 minutes until the DSL LED is on.
REV2.0.0
If the Wireless LED is off, please press the WiFi button on the rear panel for
2 seconds, then check the LEDs again in a few seconds.
Wireless
Connect wirelessly by using the default
Or
network name (SSID) and password
on the product label printed on the
bottom of the modem router.
--please select--
--please select--
Back Next
Back Next
turns on.
Splitter
VDSL LAN4/WAN LAN3 LAN2 LAN1
c
Select Yes to auto detect your connection type and then click
Next to continue.
Quick Setup-Auto Detection
Auto-Detect Connection Type:
Yes.
No. I want to configure The Internet Connection myself.
Back
f
Click Next to continue.
Note: You may rename your wireless network name and create your own
password.
Quick Setup-Wireless
Wireless Network Name:
TP-LINK_XXXX
Channel:
Mode:
Security:
Password: XXXXXXXX
Back
WPS/
USB WiFi ON/OFF POWER
RESET
Power DSL Wireless
On On On
Next
Next