Part Names Of Remote Control; Tv Signals In Your Region - Sharp AQUOS LC-20S4U Operation Manual

Part Names of Remote Control
POWER (p. 17)
Switches the Liquid Crystal
Television power on or standby.
PIC. FLIP (p. 34)
Sets the orientation of the picture.
SLEEP (p. 33)
Sets the sleep timer.
MENU RETURN (p. 19) - -......
Returns to the previous screen.
ENTER---
Executes a command.
MUTE (p. 18)
Mutes the sound.
AUDIO ONLY (p. 32)
Outputs audio without screen image.
VOL (+)/(-) (p. 18)
Sets the volume.
MTS(p.18)--...--...--...~~
Selects audio settings.
TV Signals in Your Region
DISPLAY
Displays the receiving channel and
the current time for 10 seconds.
AV MODE (p. 21)
Selects preferred AV MODE.
BACKLIGHT (p. 22)
Adjusts the brightness of the screen.
~/..., /~/~
(Cursor control) (p. 19)
Selects a desired item on the screen.
MENU (p. 19)
Displays the menu screen.
INPUT (p. 17)
.
Switches the input source between
INPUT1 (COMPONENT), INPUT2,
INPUT3 and TV mode.
CC (p. 31)
Displays Closed Caption subtitles.
FLASHBACK (p. 18)
Returns to the previous channel.
CH (A)/(V) (p. 18)
Selects a channel.
Channel Select (p. 18)
Sets the channel.
This product is factory set to comply with the TV broadcasting system in the United States. For Brazil, Argentina and Uruguay,
set the color system according to the country before using this product by following the table below.
Country
TV broadcasting
Factory setting of color system User setting
system
TV Video TVIVideo
U.S.A.
Color: NTSC NTSC (N358) NTSC (N358)
Not required or N/A
TV ch: US ch US ch US ch
Canada, Mexico, Color: NTSC NTSC (N358) NTSC (N358)
Not required or NI A
Latin America TV ch: US ch US ch US ch
Brazil
Color: PAL-M NTSC (N358) NTSC (N358) Set color system to
TV ch: US ch US ch US ch PAL-M (see page 25)
Argentina, Color: PAL-N NTSC (N358) NTSC (N358) Set color system to
Uruguay TV ch: US ch US ch US ch PAL-N (see page 25)
I
NOTE
>
• The 3 Dimensional Y/C separation circuit* only works when the color system is set to N358 in TV mode and Video mode.
* The 3 Dimensional
Y/C
separation circuit is used to remove flickering and color bleeding.
* The 3 Dimensional Y/C separation circuit does not function when S-VIDEO or COMPONENT signals are played.
@
13