Nokia 3210 Service & Repair Manual page 12

C111, C115, C113 faulty
Check the current consumption in different operation modes (refer to the table below)
Check if the high current consumption comes from the VB, Vout or output voltages of CCONT
Disconnect coil by coil L105 ( N702) L505, L506 ( PA's) and check consumption again
Check and disolder C111, C115 and C113
calibrate Battery value if charging stops to early or battery is to hot after charging (see also chapter "Not
charging)
Figure 1: current consumption values
Function mode
Off state
Sleep mode
Call mode GSM 900
Call mode GSM 1800
version 1.0 / 05.11.1999
CONFIDENTIAL
Minimum current in mA
0
2
0
0
Service & Analysis Center Europe
Maximum current in mA
1
8
1000
1000
Training Team
Page 12 of 37