Location Info Sharing; Anykey Answer; Automatic Redial; Touch Dialing - Nokia 2865 User Manual

S e t t i n g s
If you use the Auto-update of date & time
network, you may be prompted to enter the time manually. Network time will
replace the time and date when you reenter your digital network.
You may be prompted to enter the time manually, if the battery is removed or
discharged while you are outside the digital network and the battery is installed or
recharged while you are still outside of the digital network.
■ Call

Location info sharing

Location info sharing
only during an emergency call.
Select Menu > Settings
GPS should not be used for precise location measurement, and you should never
rely solely on location data from the GPS receiver.
This feature is not designed to support positioning requests for related calls. Contact
your service provider for more information about how your phone complies with
government regulations on location based emergency calling services.

Anykey answer

When Anykey answer
key to answer a call. Select

Automatic redial

Occasionally, your network may experience heavy traffic, resulting in a fast busy
signal when you dial. With automatic redial activated, your phone redials the
number, and notifies you once the network is available.
Select Menu > Settings

1-touch dialing

To activate or deactivate
1-touch dialing > On
1-touch dialing," p. 45.

Automatic update of service

If supported by your wireless service provider, this feature allows you to set your phone
to automatically receive network updates that may improve service and coverage.
Select Menu > Settings
56
sets whether your GPS location is always reported or reported
> Call > Location info sharing
is on, briefly press any key except the right selection or end
Menu > Settings
> Call > Automatic redial
1-touch dialing, select
or Off. For more information on
> Call > Automatic update of service
option while outside your digital
> Emergency
> Call > Anykey answer
> On or Off.
Menu > Settings
1-touch
or On.
> On or Off.
> Call >
dialing, see "Set up
> On or Off.