Data And Fax Calls - Nokia 2865 User Manual

Access no.+card no.+phone
card number (plus PIN if required), then enter the phone number.
Prefix+phone no.+card
phone number) and phone number, then enter the card number (plus PIN if
required).
4. Enter the required information (access number or prefix and card number),
and select OK to confirm your entries.
5. Select Card name
Select a calling card
You can select one of the calling cards for which you have saved information. The
selected card information is used when you make a card call.
1. Select Menu > Settings
2. Enter your security code, and select OK. See "Security," p. 74.
3. Select the calling card of your choice.
Make card calls
After you have selected a calling card, make a card call.
1. Enter the phone number, including any prefix (such as 0 or 1) that your
calling card may require when you make a calling card call. See your calling
card for instructions.
2. Press and hold the send key for a few seconds until
3. Follow the instructions on the screen.
4. When you hear the tone or system message, select OK.

Data and fax calls

Data and fax calling is a network service. See "Network services," p. 6. If your
network operator supports this feature, you can set up the device to send or
receive data and fax calls when connected to a device such as a PDA or PC.
Receive data or fax calls
For better performance during data or fax calls, place the device on a stationary
surface. Do not move the device or hold it in your hand during a data call.
no.—Dial the access number for the calling card,
no.—Dial the prefix (numbers that must precede the
, enter the card name, and select OK.
> Call > Calling card.
Card call
S e t t i n g s
is displayed.
65