Sony SLV-998HF Operating Instructions Manual page 88

General setup information (continued)
Attaching the external
antenna connector
When using a 300-ohm twin lead cable
for VHF/UHF antenna, use the EAC-32
antenna connector (not supplied) to
connect the antenna to the VCR.
1
2
3
Attaching a UHF/VHF band
mixer
When using both 75-ohm coaxial cable
and 300-ohm twin lead cable for VHF/
UHF antenna, use the EAC-66 UHF/
VHF band separator/mixer (not
supplied) to connect the antenna to the
VCR.
1
2
3
4
88
Additional Information
Loosen the screws on the antenna connector.
Wind the twin leads around the screws on the antenna connector.
Retighten the screws.
Loosen the screws on the mixer.
Wind the twin leads around the screws on the mixer.
Retighten the screws.
Connect the 75-ohm coaxial cable to the mixer.
300-ohm twin
lead cable
75-ohm coaxial
cable
300-ohm twin
lead cable
EAC-32 Antenna
connector (not
supplied)
EAC-66
UHF/VHF
band
separator/
mixer (not
supplied)