Sony SLV-998HF Operating Instructions Manual page 50

Setting up VCR Plus+ (continued)
To select the channel map
If the program information signal in your area
has several channel map patterns (up to 8), the
Choose your Cable CH MAP menu appears:
• the first time you turn on the VCR after
completing channel mapping
• after selecting AUTO and pressing OK on the
SMART CHANNEL MAPPING menu
In this case, you have to select the channel map
on the Choose your Cable CH MAP menu.
1
2
3
Notes
• It takes about 1 hour to complete channel mapping.
• The VCR can receive the program information signal only while the VCR is turned
off and no timer recordings are set.
• The VCR cannot set the guide channels correctly unless you enter the ZIP/POSTAL
CODE in your area.
• When you move to a different area, you must set up the VCR again and enter your
new ZIP/POSTAL CODE in the EASY SET UP procedure.
50
Getting Started
Find the VCR Plus+ Channel Listing in your program guide. For
details, see page 48.
Press CURSOR ?// to select the channel map number you want by
checking the channel number in the program guide.
Press OK.
Channel map
number
Station ID
Choose your Cable CH MAP
MAP 1 2 3 4 5 6 7 8
KABC 1 2 5 CNN
KCBS 4 MTV
KAET 1 4 – – –
WNET 3 5 – – –
Use t o s e l e c t
Th e n p u s h OK
Pu s h MENU t o q u i t
Channel number
9 8
5 5
– – –
– – –