To reset some of the menu settings to their original values, follow these steps:
To unlock the keypad:
To turn on your phone, press and hold the power key for a few seconds.
To insert a SIM card, follow these steps:
To turn off your phone, press and hold the power key for a few seconds.
If "Not charging" is displayed:
To activate a profile quickly in standby mode or during a call, press the power key quickly, scroll to the desired profile, and press OK. You can then select a profile that does not have silent mode enabled.
You can filter messages and calls from specific numbers using the No. screening feature. To view and add or delete numbers from the list of senders whose messages and phone calls will be filtered:
During a call, you can press the up scroll key to increase and the down scroll key to decrease the earpiece volume. For ringing and message alert tones, press Menu, select Settings, Tone Settings, and then Ringing volume.
You can try to manually select the network. To do this, press Menu and select Settings, Phone settings, and then Network selection. From there, you can choose to select the network manually.
When reading a text message, you can press Options and select Large fonts to make the text bigger.
Yes, the phone has games. You can access them by pressing Menu and selecting Games. Each game is provided with a brief help text.
This could be due to Call divert being activated, which diverts your incoming calls to your voice mailbox or another phone number. Also, if the caller's number is on your No. screening list, you will not receive a ring tone or vibrating alert for calls from that number.
To send a message, the phone number of your message centre has to be saved in the phone. You can obtain this number from your service provider. For more details about messaging services, check with your service provider.
The device is intended for use when supplied with power from ACP-7, ACP-12 or LCH-12 chargers.
To turn on the ringer, you need to adjust the phone's profile settings. Press Menu and select Settings and Profiles. Select the profile you want to modify and Personalise. From there, you can select Ringing tone and Ringing volume to set the desired tone and volume level. Press OK to save changes.
Yes, you can set a custom ringtone. To do this, press Menu and select Settings and Tone Settings. Then select Ringing tone to choose the tone you hear when you receive a call. You can also use the Composer to create your own ringing tones by keying in notes.
Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance.
When writing text, press Options and select Dictionary. To change back to the traditional text input, select Dictionary off.
To set an alarm:
You can copy names and phone numbers all at once or individually from the internal phone book to the SIM phone book, or vice versa. To do this, in standby mode, press Menu and select Contacts and Settings. Then select Copy.
To open the back cover, press the back cover release button (1), then open the back cover and remove it (2).
You can copy names and phone numbers all at once or individually from the SIM phone book to the internal phone book. To do this, in standby mode, press Menu and select Contacts and Settings. Then select Copy.
To change the date and time:
The signal intensity of the cellular network at your current location is indicated on the display when the phone is in standby mode.
You should only use batteries, chargers, and enhancements approved by Nokia for this particular model. The device is intended for use with ACP-7, ACP-12 or LCH-12 chargers.
Need help?
Do you have a question about the 2660 and is the answer not in the manual?
Questions and answers
activate silent or meeting mode
To activate silent or meeting mode on the Nokia 2660:
1. Press the middle button on the main screen to open the menu.
2. Scroll down and select the Settings icon (a cog).
3. Go to "Personalization" and press the middle button.
4. Select "Sounds" and press the middle button.
5. Set volume to silent, and turn off alerts, notifications, and vibration as needed.
This will activate silent or meeting mode.
This answer is automatically generated
I need to change the time
how can I change the time
Why can't I find a Nokia 2660 manual?
does it have a notes section so you make a save say password or credit card access code in the Nokia 2660 phone
why does my phone frequently become silent so that I cannot receive calls or make phone calls - symbol of mic with bar through it