Bluetooth Activation; Auto Connection; Troubleshooting - Audio Pro ADDON T12 Owner's Manual

MORE ABOUT USING BLUETOOTH

1. BluetOOtH aCtivatiOn

select Bluetooth as the input source by pressing "srC" (source) on the remote control until the led on addon t12 turns
blue. Bluetooth is now activated, with a flashing blue light if no device is connected, and a solid blue light if a device
is connected. addon t12 will now automatically search for paired devices for 3 minutes, and the led will rapidly
flash blue during the search. addon t12 will locate devices within range that have previously been connected and will
connect them automatically. if no devices are located within 3 minutes, addon t12 will revert to standby status. please
see the "pair your device with addon t12" section for information about how to pair new devices with addon t12.

2. autO COnneCtiOn

if a device is moved outside the range of addon t12 (approx. 10 metres without obstacles), that device is discon-
nected. the device is automatically connected again when it is moved back within range. addon t12 can memorise
up to 6 devices and always starts by searching for the last device to have been connected. if addon t12 has been
connected to devices a–B–C–d–e–f in that order, device f is given first priority, while device a is given last priority.
every time addon t12 starts up, it will perform an auto connection of devices within its range.
please note:
- auto connection will not function if addon t12 is turned off via the main power switch at the rear of the unit.
- if a seventh device is connected, device a's address will no longer be memorised.
- always start Bluetooth in your smartphone/computer first, and then start addon t12 for auto connection.
3. if the "pair" button is pressed while Bluetooth is selected as the audio source, addon t12 will perform a new
search for 3 minutes during which the led will rapidly flash blue.

TROUBLESHOOTING

with the help of Bluetooth technology, Bluetooth-compatible devices can
easily be connected to each other over a short wireless connection.
• A Bluetooth device could cause sound-related or technical faults,
depending on use, in the following cases:
- when some part of the body is in contact with the receiving/trans-
mitting system for the Bluetooth device or addon t12.
- electrical variations due to obstacles in the form of walls, corners, etc.
- exposure to electrical disruptions from devices within the same
frequency band, for example medical equipment, microwave ovens
and wireless networks.
• Place Addon T12 and the Bluetooth device close to each other during
the pairing process.
• The greater the distance between Addon T12 and the Bluetooth
device, the poorer the quality will be. if the distance exceeds the
Bluetooth device's wireless range, the connection will be lost.
• In areas with poor reception, the Bluetooth connection might not work
as well as it should.
• The Bluetooth connection only works when it is near the device. The
connection is automatically broken if the Bluetooth device moves
outside the range area. the sound quality may even deteriorate
within that area due to obstacles such as walls or doors.
• This wireless device may cause electrical disruptions during use.
• You do not need to enter the PIN code (password) when connecting
the Bluetooth device to t12. if the window for entering the pin code
is displayed, you should enter <0000>.
• You cannot connect to a Bluetooth device that only supports the HF
area function here (hands free).
• Addon T12 cannot search or connect correctly in the following cases:
- if there is a strong electric field around addon t12.
- if the Bluetooth device is turned off, is not available or does not
function as it should.
- please note that items such as, for example, microwave ovens,
wireless network adapters, fluorescent lights and gas cookers use
the same frequency range as the Bluetooth device, which could lead
to electrical disturbances.
7