Troubleshooting Tips; Noise; Before You Call For Service - GE UNC15NJ-II Owner's Manual And Installation Instructions

Before you call for service...

Troubleshooting Tips

Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem
Low capacity
No ice
Time to Clean light is on

Noise

The ice machine is designed for quiet operation but will make
some noise during the ice making cycle.
18
Possible Causes
Restricted drain or standing water in
the bin
Switch is OFF
Electric breaker has been tripped
Water supply is low
Auger motor is not working or is over- Reset by pressing ON/OFF button. If this
What to Do
Clean the air cooled condenser fins.
Clean the ice making system.
Check the drain line for kinks
Press the ON/OFF button to turn the
power on.
Flip the electric breaker back on.
If the Check Water light is flashing Red,
the water supply is low.
doesn't reset the motor and the lights
continue to flash, call for service.
Clean the ice making system follow-
ing directions in the Care and Cleaning
section.