Last Number Redial; Speed Dialing; 1-Touch Dialing - Nokia 252 Owner's Manual

Last Number Redial

Clear the display, then press 6(1' 6(1'.
•
Last 15 Dialed Calls
Clear the display, press 6(1', then
•
repeatedly until you see the number you want. Then
press 6(1' to dial it.
See "Dialed Calls (Menu 2 1)" on page 33 for more
information.

Speed Dialing

• Dial the number of the memory location (1-75) where
the phone number is stored, then press 6(1'.
You can also enter a stored name then press 6(1'.
The phone dials the number stored with that name.
If the memory location is empty, the message
EMPTY appears.

1-Touch Dialing

If 1-Touch Dialing is set to On, you can dial the phone num-
ber stored in any of the memory locations 1-8 by pressing a
single key:
• Hold the required number key (1-8) for 2 seconds.
Note: Location 1 is recommended to be used as the Voice Mailbox
Number. Location 9 cannot be used for 1-Touch Dialing to any
number other than the preprogrammed emergency number.
See "1-Touch Dialing (Menu 3 6)" on page 40.
16
. Press
LOCATION