Makita 9015A Technical Information page 4

R
epair
( 4 ) Assembling spiral bevel gear 33, lock spring 17 and lock sleeve
Assemble lock spring 17 to spiral bevel gear 33, with turning it anti-clock wise as same as removing.
See Fig. 5.
Spiral bevel gear 33
(5) And then, assemble lock sleeve to spiral bevel gear 33, with turning it anti-clock wise as same as removing.
See Fig. 6.
Spiral bevel gear 33
(6) Assemble the spindle section as follows. See Fig. 7.
1. Spiral bevel gear 33 to which lock spring 17 and lock sleeve have been assembled in (5).
2. Lock washer
3. Flat washer 10
4. Retaining ring S -8 with which spiral bevel gear 33, lock washer and flat washer 10 are fixed
on spindle.
Retaining ring S -8
Flat washer 10
Lock washer
Spiral bevel gear 33
Lock sleeve
(7) Assembling bearing box
Cut portion of the assembled bearing box has to be faced to the front as illustrated in Fig. 8.
Front side
Cut portion of
bearing box
Lock spring 17
Lock sleeve
Gear housing
Fig. 5
Fig. 6
A. Flat part of lock washer has to come to C.
B. Flat part of lock sleeve and the same of spiral bevel
gear 33 have to come to C.
C. Flat part of spindle
Bearing box
Spindle
Fig. 7
Motor
housing
Fig. 8
Cord guard side
P 4 / 5