Makita 9015DB Technical Information
Hide thumbs
Also See for 9015DB:
- Instruction manual (16 pages) ,
- Instruction manual (12 pages) ,
- Instruction manual (16 pages)
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
T
ECHNICAL INFORMATION
Models No.
Description
C
ONCEPTION AND MAIN APPLICATIONS
Model 9015DB(and 9016DB) are sister version of
existing Model 9015B/9016B.
Their benefit is AC/DC switch,which makes it
possible to use at both AC and DC power source(e.g.welder).
Other features and benefits are equal to Model 9015B/9016B.
S
pecifications
Voltage (V)
120
No load speed(R.P.M.)
Size of depressed
center wheel
Net weight
Cord length
S
tandard equipment
Lock Nut Wrench 35----------------------1 pc.
Depressed Center Wheel (36N)--------1 pc.
<Note> The standard equipment may differ from country to country.
O
ptional accessories
Depressed Center Wheel (24)
Wire Cup Brush 90
Rubber Pad
Lock Nut(for abrasive disc)
Abrasive Disc (24,30,50,80, 100,120)
9015DB,9016DB
125mm(5") Angle Grinder
150mm(6") Angle Grinder
Current (A)
Cycle (Hz)
50/60
12.5
9015DB
9016DB
9015DB
Outer diameter
9016DB
Arbor diameter
Thickness
Without wheel
9015DB
With wheel
9016DB
Continuous Rating (W)
Input
Output
800
1370
10000rpm (UK:11,500rpm)
10000rpm (UK:11,500rpm)
125mm(5")
150mm(6")
22.23mm(7.8")
6mm(1/4")
2.4Kg(5.3lbs)
2.9Kg(6.4lbs)
3.0Kg(6.6lbs)
2.5m(8.2ft)
Product
391
(15")
139(5-1/2") 9015B
169(6-5/8") 9016B
Max. Output(W)
1600
Advertisement
Related Manuals for Makita 9015DB
Summary of Contents for Makita 9015DB
- Page 1 9015DB,9016DB Description 125mm(5") Angle Grinder 150mm(6") Angle Grinder ONCEPTION AND MAIN APPLICATIONS Model 9015DB(and 9016DB) are sister version of (15") existing Model 9015B/9016B. Their benefit is AC/DC switch,which makes it possible to use at both AC and DC power source(e.g.welder).
- Page 2 (by removing screws, turning gear housing and fixing screws) convenient for cutting job. omparison Makita Makita Model No. 9005B 9006B 9015DB 9016DB AC/DC AC/DC AC/DC AC/DC Switch 125(5") 150(6") 125(5") Diameter of wheel (mm) 150(6")
- Page 3 epair (1) Replacing of armature 1) Remove the wheel stone and the wheel cover, respectively. 2) Remove the carbon brush. 3) Disconnect the tapping screw PT5x30(4 pieces)for mounting the gear housing and motor housing and then remove the armature. Remove the wheel stone and the wheel cover, respectively. Remove the tapping screw CT5 x16(4 pieces) for mounting the bearing box.
- Page 4 Turning the gear housing and gear housing cover in 4 directions together every 90 enables to change angle between wheel stone and handle. (Note) They can turn while the gear housing cover is housed in the motor housing. ircuit diagram (3) Reference information : angle change between wheel stone and handle...