How To Replace The Fuse; High Level Input (Speaker In); Power Terminals - Hertz HP 1D Advanced Manual

How to replace the fuse

• Remove the protective cover.
• Remove the fuse with a 3mm Allen wrench.
• Be sure that the value of the new fuse is identical to the fuse supplied, then insert it into its seat
tightening the screws thoroughly. Be sure to carry out a perfect connection to avoid false
contacts or voltage drops along the power supply line.
• Insert again the protective shell into its seat.
CAUTION: In order to ensure the proper fuse working tighten the screws making sure
the washer bend and perfectly fit the fuse.
BFH 11

High Level Input (SPEAKER IN)

For greater convenience you can connect the cables to the specific connector before inserting it
into the inputs panel. Refer to the following instructions. Carry out this operation with amplifier
and head unit off.
1_Peel the cables
2_Fix the cables
into the connector
3_Insert the
connector
L+
L-
R+
R-
58

Power Terminals

GND
150A
Italiano | English
HP 1D
REM OUT or ELECTRIC ANT.
+BATT GND
Provided
300A
HP 1KD
REM OUT or ELECTRIC ANT.
+BATT GND
Provided
150A
59