Other Functions; Auto Turn On; Hp Rvc (Hp 1D / Hp 1Kd); Hp Rbc (Hp 1Kd) - Hertz HP 1D Advanced Manual

Other functions

Auto Turn ON

The HP amplifier features automatic switching. When using high level inputs, SPEAKER IN, a
sensing system switches the amplifier on when it receives an input signal and off when the signal
stops. In this configuration, you do not need to connect the Remote to the head unit. When using
the SPEAKER IN inputs the amplifier provides a remote output from the REM terminal block to
switch the other system amplifiers on.
ON
Original Source
ON
Original Source
OFF
HP RVC (HP 1D - HP 1KD)
When you wish to control the Sub volume directly from your listening point, you can use the
supplied external digital HP RVC volume control. Insert the connector at the end of the cable into
the special socket to the amplifier and the other end into the back plugin of the HP RVC. The
potentiometer will grant a continuous adjustment in the – 36 to + 6 dB range
HP RVC
+6 dB
0 dB
-36 dB
20 200 2K 20K Hz
REM OUT
ON
REM OUT
OFF
44

HP RBC (HP 1KD)

The Remote Bass Control enables equalization in a very low range in order to make the most of
any subwoofer section potentials and achieve thrilling performance.
Insert the connector at the end of the cable into the special socket to the amplifier and the other
end into the back plugin of the HP RBC. The Freq. potentiometer will choose the operation
frequency in the 40 to 120 Hz range and the Boost potentiometer will adjust the operation level up
to 9 dB exaltation.
OFF
20 200 2K
HP RBC
9
6
3
0
Italiano
HP RVC
+6 dB
0 dB
-36 dB
20K Hz
+9 dB
0 dB
40 Hz 120 Hz
45
| English
CAUTION: subwoofers are
not all able to stand the
stress generated by this
adjustment; most of all you
must adjust correctly the
terminal input sensitivity to
avoid to output any
distortion and to exploit all
the amplifier power.