Voice Commands - Nokia 2116 User Manual

Set the auto-update
Auto-update is a network service. See "Network Services"
on page 8.
If your wireless service provider supports this feature, you
can allow the digital network to set the clock, which is
useful when you are out of your home area (for example,
when you travel to another network or time zone).
In the standby mode, select
date settings > Auto-update of date & time
Confirm first, or Off.
If you use the Auto-update of date & time
outside your digital network, you may be prompted to
enter the time manually. Network time will replace the
time and date when you re-enter your digital network.
If your battery is removed or discharged outside the digital
network, you may be prompted to enter the time manually
(once the battery is replaced or recharged and you are still
outside of the digital network).

Voice commands

Voice commands allow you to quickly perform certain
commands by speaking them, instead of using the keypad
to access them. For example, you can switch your profile,
Menu > Settings > Time and
> On,
option while
call voicemail, playback a voice memo, or review recent
calls by speaking the recorded command.
Add a voice command
Before using a voice command, you must add the
command to the device function.
1 In the standby mode, select
commands.
2
Select the device function you wish to tag: Profiles,
Voice mailbox, Voice recorder, or
3
If necessary, select an option associated with that
function, and select Options
4 Select Start, and speak the voice command clearly into
the microphone.
Do not select Quit unless you want to cancel the
recording.
The device replays then saves the recorded command.
appears next to functions that have voice commands
assigned.
Activate a voice command
After you have associated a voice command with a device
function, you can request the function by speaking the
voice command.
1
In the standby mode, select and hold Contacts.
Copyright © 2005 Nokia.
Menu > Settings > Voice
Call log.
> Add command.
All rights reserved.
51