Picture Messages - Nokia 2116 User Manual

Set up voice mail with dialing codes
1 In the standby mode, select
2
Scroll to an empty speed dialling slot, and select
Assign.
3
Enter your voice mailbox number, including the area
code.
4
Refer to dialing codes, and enter codes as necessary
using the information that you saved from "Voice
mailbox number and process" on page 37.
For example, if you pause for 5 seconds after
connecting to voice mail, enter p twice after the voice
mailbox number (for example, 2145551212pp).
5 Enter any remaining pauses or other information that
allows you to listen to your messages, and select OK.
6
Enter a name (such as voice mail), and select OK.
To dial and listen to your voice mail, press and hold the
assigned speed dialling key in the standby mode.

Picture messages

Picture messaging is a network service. If your wireless
service provider supports this feature, your device comes
with five preloaded pictures. You can, however, over-write
any of the five pictures that come with your device.
Pictures can be attached to a message and sent using text
messaging to compatible devices or PCs. Picture messages
behave the same as text messages, but pictures take up
Copyright © 2005 Nokia.
38
Contacts > speed dialling.
All rights reserved.
more space than text. Pictures are stored in the templates
folder at Menu > Messages >Text messages
Note: Picture message function can be used only if it is
supported by your network operator or service provider.
Only devices that offer picture message features can
receive and display picture messages.
Copyright protections may prevent some images, ringing
tones, and other content from being copied, modified,
transferred, or forwarded.
Write and send
When a picture is added to a text message, the message
converts to picture message. The message counter in the
upper right of your display shows the characters available
for you to type in.
1
In the standby mode, select
messages > Create message. Depending on your
wireless provider, you may also select Text; then, select
Edit message.
2
Write a message using the keypad (or enter nothing if
you choose to just send a picture), and select
> Insert picture.
3 Scroll down through the pictures, and select View.
4 Select Insert to insert the picture into your message;
otherwise select Back, scroll to another picture, and
select View again.
> Templates.
Menu > Messages > Text
Options