TP-Link TL-WA855RE User Manual page 28

The extender obtain the current time from the Internet automatically. You can
set the time zone of your location via the Time Settings page.
1.
Launch a web browser, log into http://tplinkrepeater.net, and then go to
Settings > System Tools > Time Settings page.
2.
Select the Time Zone of your location, then click
1.
Launch a web browser, log into http://tplinkrepeater.net, and then go to
Settings > System Tools > Time Settings page.
2.
Set the daylight saving time by the following steps:
Save.
(1) Select Enable Daylight Saving Time to enable this function.
(2) Select the correct Start date and time when daylight saving time starts
at your local time zone.
(3) Select the correct End date and time when daylight saving time ends
at your local time zone.
(4) Click Save.
turn off the LED at the specific time
LED Control can
normally after the LED is off.
1.
Launch a web browser, log into http://tplinkrepeater.net, and then go to
Settings > System Tools > LED Control page.
2.
Tick the Night Mode to enable the LED Control function.
3.
Set the time period to turn off the LED.
. The extender can still work
Manage the Extender