Lap
timing—You can use the lap time function to track how long it takes to
complete a cycle or lap. Select
immediately returns to zero for the next lap. The lap time appears below the
running time. Each time you select Lap, the new measured time appears at
the beginning of the list.
2. Select
Stop
to end timing and display total time.
Save, view or delete split and lap times
• To save a time while the timer is running select
the measurement, and select OK. If you do not enter a name, the total time is
used as the default title for the lap or split time.
• To view the last measured time, from the main screen, select
Stopwatch
>
Split timing
• To browse saved times, from the main screen, select
Stopwatch
>
Split timing
• To delete a saved time, from Stopwatch, select
or select
Delete times
Operation note
If you press End and return to the main screen, the timer continues to run in the
background, and
To return to the stopwatch, do the following:
1. At the main screen, select
2. To stop the timer, select Stop.
Lap
to note the lap time. The timer stops, then
or
Lap timing
or
Lap timing
>
One by one
or
Delete
appears in the upper left corner of the screen.
Menu
>
Tools
Stop
> Save, enter a name for
>
Show last
time.
Menu
>
>
View
times.
View times
>
all.
>
Stopwatch
>Continue.
T o o l s
Menu
>
Tools
>
Tools
>
Select
>
Delete
69