Switch The Loopset On Or Off; Switch On - Nokia LPS-5 User Manual

Wireless loopset
Hide thumbs Also See for LPS-5:
Table of Contents

Advertisement

Available languages

Available languages

G e t s t a r t e d
Warning: Use only chargers approved by Nokia for use with this
particular model. The use of any other types may invalidate any approval
or warranty, and may be dangerous.
When you disconnect the power cord of any accessory, grasp and pull the plug, not
the cord.
1. Connect the charger to a wall outlet.
2. Connect the charger cable to the charger
connector. The indicator light is red during
charging.
Charging the battery fully may take up to
1 hour.
3. When the battery is fully charged, the
indicator light turns green. Disconnect the charger from the loopset,
then from the wall outlet.
The fully charged battery has power for up to 6 hours of talk time or up to
110 hours of standby time.
When the battery is discharged, the loopset beeps about every 5 minutes,
and the indicator light slowly flashes red.

■ Switch the loopset on or off

Switch on

To switch on, press and hold the multifunction key for about 2 seconds.
The loopset vibrates once and plays an ascending sequence of beeps, and
8

Advertisement

Table of Contents
loading

Table of Contents