Inductive Loopset LPS-4 User Guide 9354812 Issue 3...
Nokia reserves the right to revise this document or withdraw it at any time without prior notice.
The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. Unauthorized changes or modifications to this device may void the user's authority to operate the equipment. Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries.
1. General The Mobile Inductive Loopset LPS-4 for people with hearing aids is developed to facilitate the use of a compatible mobile phone together with T-coil equipped hearing aids. When using the inductive loopset, you can speak directly to the microphone inside it.
1. Place the loop around your neck, and connect the plug to its counterpart. 2. Connect the Pop-Port plug to the bottom of the phone. The phone displays the following symbol: 3. Switch your hearing aid to the T or MT mode. © 2006 Nokia. All rights reserved.
In a noisy environment or if the received speech is weak, increase the volume so that the background noise becomes weaker and the caller’s voice becomes stronger. © 2006 Nokia. All rights reserved.
Connect the plug of the external device to the audio output connector with the symbol on the right side of the loopset device. © 2006 Nokia. All rights reserved.
The loopset can be connected to a compatible speech processor with a suitable cable that has a 3.5-mm stereo or mono plug. The sound that you hear through the loopset is monophonic. External audio input: • This feature is not available. • Symbol: © 2006 Nokia. All rights reserved.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. • Do not paint the device. Paint can clog the moving parts and prevent proper operation. If the device is not working properly, take it to the nearest authorized service facility for service. © 2006 Nokia. All rights reserved.