Dn Configuration Requirements For The Bst Doorphone; Creating A Bst Doorphone Dn Record - Nortel BST Installation And Configuration Manual

Chapter 2

DN configuration requirements for the BST Doorphone

This chapter describes how to set up a DN record for a BST Doorphone prior to a hardware
installation.
Before installing a BST Doorphone, you must select and configure an Inactive DN (vacant port)
on the Business Communications Manager system for BST Doorphone compatibility.
Note: Some default DN settings can cause the BST Doorphone to automatically answer
incoming calls that are not intended to be heard over the BST Doorphone.

Creating a BST Doorphone DN record

Follow these steps to create a DN record for the BST Doorphone.
1 From Unified Manager, click on the keys beside Services, Telephony Services, System DNs,
and Inactive DNs.
Figure 1 Inactive screen example
2
Click on the key beside Set DNs.
Tips: The number of Inactive DNs for digital
telephones and peripherals on the Business
Communications Manager are shown under the Set
DNs heading.
3
Click on the Set DN record (DN XXX) that you want to configure for the BST Doorphone.
The figure below shows a detailed view of the information under the DN (DN xxx) headings.
DN headings and fields that must be reviewed for BST Doorphone compatibility are shown
with a red asterisk.
BST Doorphone Installation and Configuration Guide
7