Selecting The Location; Connecting The Mains Adapter - Fujitsu AMILO Xi 3670 First-Time Setup

Hide thumbs Also See for AMILO Xi 3670:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Preparing your notebook for use

Selecting the location

Notebook
Power adapter
Location,selectingthe
Select a suitable location for the notebook before setting it up. Consider
the following points when selecting a location:
Never place the notebook and the mains adapter on a heat-sensitive
surface. This could damage the surface.
Never place the notebook on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause damage due to overheating.
Do not place the notebook directly on your legs for extended periods. The
underside of the notebook heats up during normal operation. Extended contact
with the skin can become unpleasant or even result in burns.
Place the notebook on a stable, flat, non-slip surface. Please note that
the rubber feet may mark certain types of surfaces.
Keep other objects 100 mm away from the notebook and its mains
adapter to ensure adequate ventilation.
Never cover the ventilation slots on the notebook.
Do not expose the notebook to extreme environmental conditions. Protect
the notebook against dust, humidity and heat.

Connecting the mains adapter

Preparing foroperation
Mains adapter
Please observe the safety precautions in the enclosed "Safety" manual.
The supplied mains cable conforms to the requirements of the country in which
you purchased your notebook. Make sure that the mains cable is approved
for use in the country in which you intend to use it.
The mains cable of the mains adapter must only be connected to a mains
socket if the notebook is connected to the mains adapter.
Make sure that the rated current of the mains adapter is not higher than that
of the power system to which you connect the mains adapter (refer to the
"Technical Data" section, "Mains adapter", Page 14).
1
2
12 - English
► Connect the mains adapter cable (1) to the
DC jack (DC IN) on the notebook.
► Connect the mains cable (2) to the
mains adapter.
► Plug the mains cable (3) into a mains outlet.
3
10601078868, edition 1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents