DeWalt DW253 User Manual page 24

E N G L I S H
• To run the tool, press the variable speed switch (1).
The pressure exerted on the variable speed switch
determines the tool speed.
• If necessary, press the lock-on button (2) for
continuous operation and release the variable
speed switch. The lock-on button works only in
fullspeed, forward and reverse rotation.
• To stop the tool, release the switch.
• To stop the tool in continuous operation,
press the switch briefly and release it. Always
switch OFF the tool when work is finished and
before unplugging.
Holding the tool (fig. F)
• For best results, hold the screwdriver with the
hand directly in line with the fastener and press
the variable speed switch with the last one or two
fingers of the hand, as shown. This reduces the
chance of the screw slipping from the drive
accessory when pressure is applied.
• To drive the screw, place it on the bit or into the
socket, press the variable speed switch and
push the screw into the workpiece with a
smooth, continuous motion. When the screw is
seated, a buzzing sound will come from the front
of the tool to indicate that the clutch has
disengaged.
Various types of 1/4" hex. bits, holders, sockets and
adaptors are available as an option.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your D WALT Power Tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your Power Tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
en - 6
DW274K/DW274KN
• Regularly remove drywall dust from the clutch
housing using compressed air. To do so, remove
the depth locator and adjustment collar.
Unwanted tools and the environment
Take your tool to an authorized D
agent where it will be disposed of in an
environmentally safe way.
GUARANTEE
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the
performance of your D
it within 30 days, complete as purchased, to the
point of purchase, for a full refund or exchange.
Proof of purchase must be produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your
D WALT tool, in the 12 months following
E
purchase, it will be undertaken free of charge at
an authorized D WALT repair agent. Proof of
E
purchase must be produced. Includes labour and
spare parts for Power Tools.
Excludesaccessories.
• ONE YEAR FULL WARRANTY •
If your D WALT product becomes defective due
E
to faulty materials or workmanship within
12 months from the date of purchase,
we guarantee to replace all defective parts free of
charge or, at our discretion, replace the unit free
of charge provided that:
• The product has not been misused.
• Repairs have not been attempted by
unauthorized persons.
• Proof of purchase date is produced.
This guarantee is offered as an extra benefit
and is additional to consumers statutory rights.
For the location of your nearest authorized
D WALT repair agent, please use the appropriate
E
telephone number on the back of this manual.
WALT repair
E
WALT tool, simply return
E
19