Roland VersaEXPRESS RF-640 Setup Manual
  1. Manuals
  2. Brands
  3. Roland Manuals
  4. Plotter
  5. VersaEXPRESS RF-640
  6. Setup manual

Roland VersaEXPRESS RF-640 Setup Manual

Hide thumbs Also See for VersaEXPRESS RF-640:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Manual
Thank you very much for purchasing this product.
- To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through
this manual completely and store it in a safe location.
- Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.
- The contents of this manual and the specifications of this product are subject to change without notice.
- This manual and the product have been prepared and tested as much as possible. If you find any misprint or error, please
inform us.
- Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur through use of this
product, regardless of any failure to perform on the part of this product.
- Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur with respect to any
article made using this product.
Setup Guide

Advertisement

Table of Contents
loading

Related Manuals for Roland VersaEXPRESS RF-640

Summary of Contents for Roland VersaEXPRESS RF-640

  • Page 1 - This manual and the product have been prepared and tested as much as possible. If you find any misprint or error, please inform us. - Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur through use of this product, regardless of any failure to perform on the part of this product.

  • Page 2: Table Of Contents

    Step 3: Make the Port Settings for the Software RIP ............33 8. When Moving the Machine ..............34 Procedures from Preparing to Move Through Reinstalling ..........34 Company names and product names are trademarks or registered trademarks of their respective holders. Copyright © 2014 Roland DG Corporation http://www.rolanddg.com/...

  • Page 3: Installation Environment

    1. Installation Environment Deciding on an Installation Site Install in a quiet, stable location offering good operating conditions. An unsuitable location can cause accident, fire, faulty operation, or breakdown. WARNING Install the machine in a location that is level, stable, and able to bear the weight of the machine.

  • Page 4: Temperature And Humidity

    1. Installation Environment Temperature and Humidity Maintain the specified temperature and humidity even when the machine is not in use. If temperatures are too high or too low, it may cause malfunction. During operation: Temperature 20 to 32˚C (68 to 90˚F), relative humidity 35 to 80% (no condensation) During non-operation: Temperature 5 to 40˚C (41 to 104˚F), relative humidity 20 to 80% (no conden- sation) Installation Space...

  • Page 5: Included Items

    2. Included Items The following items are packed together with the machine. Make sure they are all present and accounted for. Arms (one for right and Stand legs (one for Power cord (1) Casters (2) left each) right and left each) Stand stay (1) Shafts (2) Shaft clamps (2)
  • Page 6 2. Included Items INKJET PRINTER MAIN- User's Manual (1) Read this first. (1) TENANCE GUIDE (1)

  • Page 7: About The Symbols

    3. About the Symbols The meanings of the symbols used in this document are as follows. The symbol indicates things that must be followed in relation to operation. Always follow these instructions to prevent accident or damage due to misop- eration.

  • Page 8: Assembling And Installing

    4. Assembling and Installing Completed drawing About the picture Tighten temporary Tighten fully Assembling and Installing WARNING Perform this task with all power switches left switched off. Otherwise sudden movement of the machine may cause injury. CAUTION Unpacking and installation must be carried out by six or more personnel. Otherwise the machine or the stand may fall, resulting in injury.
  • Page 9 4. Assembling and Installing When tightening the bolts fully, tighten them securely. Loose bolts may cause the stand to wobble. Assemble the stand.  ...
  • Page 10 4. Assembling and Installing View from right above...
  • Page 11 4. Assembling and Installing Pipe  FRONT...
  • Page 12 4. Assembling and Installing  ...
  • Page 13 4. Assembling and Installing Install the media holder.   Tighten loosely.
  • Page 14 4. Assembling and Installing Tighten loosely.
  • Page 15 4. Assembling and Installing...
  • Page 16 4. Assembling and Installing Install the drain bottle.  Be careful as the fluid used in the inspection may still remain when removing it.  Turn the bottle without applying excessive force. Remove it only when you are disposing of collected ink.
  • Page 17 4. Assembling and Installing Remove the retainers. Store the retainers be- cause they are needed again when transporting the machine.

  • Page 18: Connecting The Cables

    5. Connecting the Cables Connecting the Cables WARNING Connect to electrical outlet that complies with this machine's ratings (for voltage, frequency, and current). Incorrect voltage or insufficient current may cause fire or electrical shock. WARNING Connect to ground. This can prevent fire or electrical shock due to current leakage in the event of malfunction.
  • Page 19 5. Connecting the Cables ...

  • Page 20: Filling With Ink

    6. Filling with Ink About the picture Direction mark You can select settings and switch screens by pressing the cursor keys indicating directions. ENTER mark When you press [EN- TER], you can set the selected setting and execute the processing. Press MENU button once Press button several times...
  • Page 21 6. Filling with Ink Make the initial settings.  Hold down and press the sub power switch.
  • Page 22 6. Filling with Ink Select the language and the unit of measurement (Length, MENU LANGUAGE ENGLISH Temperature) you want. LENGTH UNIT TEMP UNIT Select the ink type.  SELECT INK TYPE E-SOL MAX2 4 C E-SOL MAX2 4 C [ YES ]   NO   ...
  • Page 23 6. Filling with Ink Apply the Cleaning Liquid.  OPEN COVER R...
  • Page 24 6. Filling with Ink Discharge any static electricity APPLY CLEANING LIQUID Area to apply Discard the stick after use. Reusing cleaning sticks may reduce printing quality.
  • Page 25 6. Filling with Ink APPLY CLEANING LIQUID Clean the print head with the SOL INK cleaning cartridges. About the LED When the cartridges are inserted - When the instruction for the cartridge insertion and removal is displayed as instructed in the display screen - When the cartridges are not inserted as instructed in the display screen LIGHT ON FLASH...
  • Page 26 6. Filling with Ink Never switch off the power during the procedures or never remove a cartridge while [FILLING INK] is displayed. [CLEAN- ING ERROR] appears on the display screen and ink filling is stopped. In that case, follow the instructions described in FILLING INK...
  • Page 27 Insert each color ink cartridge into the slot labeled with the matching color. If you insert wrong ink cartridges, the color inks may be mixed. Contact your authorized Roland DG Corp. dealer or us, if you insert wrong ink cartridges.
  • Page 28 6. Filling with Ink SET SOL CRT. Filling ink takes about 15 minutes. E M P T Y D R A I N B O T T L E CAUTION Before you detach the drain bottle, be sure to wait for the screen to display "EMPTY DRAIN BOTTLE."...
  • Page 29 6. Filling with Ink WARNING Never put discharged fluid or ink closed to fire. Doing so may cause the blaze. CAUTION To store discharged fluid temporarily, keep it in the provided drain bottle or in a durable container such as a metal can or polyethylene tank, and close the cap tightly.

  • Page 30: Network Settings

    7. Network Settings Memo The examples used in the procedures for making the settings described in this section assume you are using one computer and one machine. The settings used in this section are merely example settings. The procedures and setting values described here may not be suitable for all operating environments. If the computer you're using is connected to a number of networked devices or to the Internet, incorrect settings may adversely affect the entire network.
  • Page 31 7. Network Settings  Click [Allow] when the [User Account Control] dialog box appears.  Windows XP  [IP address]: 192.168.0.XXX [Subnet mask]: 255.255.255.0 Here, "XXX" can be any number between 1 and 254. However, be sure to avoid the numbers overlapping with those for other computers or devices.

  • Page 32: Step 2: Make The Network Settings On The Machine

    7. Network Settings Step 2: Make the Network Settings on the Machine Set the IP address. [IP ADDRESS]: NETWORK IP ADDRESS 192.168.000.XXX Here, "XXX" can be any number between 1 and 254. For the part corresponding to "192.168.000," MENU IP ADDRESS SYSTEM INFO.

  • Page 33: Step 3: Make The Port Settings For The Software Rip

    7. Network Settings Set the gateway address.  NETWORK GATEWAY ADDR. For the value to enter for your gateway address, consult your MENU GATEWAY ADDR. network administrator SYSTEM INFO. 000 . 000 . 000 . 000 SYSTEM INFO. GATEWAY ADDR. NETWORK ：Select address number ：Move to the next address...

  • Page 34: When Moving The Machine

    8. When Moving the Machine Procedures from Preparing to Move Through Reinstalling When moving the machine, keep it at a temperature between 5 to 40°C (41 to 104°F) and at relative humidity between 20 to 80% (with no condensation). Failure to do so may result in breakdown.
  • Page 35 8. When Moving the Machine   EMPTY DRAIN BOTTLE  RESET DRAIN COUNTER...
  • Page 36 8. When Moving the Machine Prepare to move.   ...
  • Page 37 8. When Moving the Machine   9 10...
  • Page 38 8. When Moving the Machine Move the machine. Transport the machine as soon as possible. Handle the machine with care when moving, keeping it level (not tilted at an angle) and preventing it from striking other objects. Reinstall the machine. Reinstall the machine and switch on the main power immediately.
  • Page 39 DOC-1178 R1-140310...

Table of Contents