Charging The Battery; Inserting/Removing The Battery - Panasonic LUMIX DMC-GF8K Basic Operating Instructions Manual

Charging the Battery

The battery that can be used with this unit is DMW-BLH7E.
1
Attach the battery paying attention to the direction of the battery.
2
Connect the AC cable.
•
The [CHARGE] indicator A lights up and charging begins.
∫ About the [CHARGE] indicator
On: Charging.
Off: Charging has completed.
(Disconnect the charger from the electrical socket and detach the
battery after charging is completed.)
•
When the [CHARGE] indicator flashes
–
The battery temperature is too high or too low. It is recommended to charge the battery again
in an ambient temperature of between 10 oC and 30 oC.
–
The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
∫ Charging time
Charging time
•
The indicated charging time is for when the battery has been discharged completely.
The charging time may vary depending on how the battery has been used.
The charging time for the battery in hot/cold environments or a battery that has not been
used for a long time may be longer than normal.

Inserting/Removing the Battery

•
Always use genuine Panasonic batteries (DMW-BLH7E).
•
If you use other batteries, we cannot guarantee the quality of this product.
•
Being careful about the battery orientation, insert all the way until you hear a locking sound and
then check that it is locked by lever A.
Pull the lever A in the direction of the arrow to remove the battery.
Approx. 130 min
Preparation/Basic
13
(ENG) SQT1286