Table of Contents
Advertisement
1.
Check idle speed and reset if necessary. If a tachometer is avail-
able, idle speed screw (A) should be set to the specifications found
on page 10 "Specifications" of this manual. Turn idle screw (A)
clockwise to increase idle speed; counter clockwise to decrease idle
speed.
WARNING
When carburetor adjustment is completed, the cutting attachment
should not turn at idle, otherwise serious personal injury may
result.
DANGER
G
T
RASS
RIMMER
O
'
M
PERATOR
S
A
23
ANUAL
Advertisement
Table of Contents
