System Recovery; System Recovery When Windows Is Responding - HP Z1 User Manual

System Recovery

WARNING!
back up all user information so you can restore it after recovery. Always use the System Restore
procedure before you use the System Recovery program. See
System Recovery completely erases and reformats the hard disk drive, deleting all data files that you
have created, and then reinstalls the operating system, programs, and drivers. However, you must
reinstall any software that was not installed on the computer at the factory. This includes software that
came on media included in the computer accessory box, and any software programs you installed after
purchase.
NOTE: Some features might not be available on systems that are shipped without a Windows
operating system.
You must choose one of the following methods to perform a System Recovery:
Recovery image — Run System Recovery from a recovery image stored on your hard disk drive.
●
The recovery image is a file that contains a copy of the original factory-shipped software. To
perform a System Recovery from a recovery image, see
responding on page 29
Recovery media — Run System Recovery from recovery media that you have created from files
●
stored on your hard disk drive or purchased separately. To create recovery media, see
recovery using recovery media on page

System Recovery when Windows is responding

CAUTION:
begin, back up any important data to a CD or DVD or to a USB flash drive.
NOTE:
In some cases, you must use recovery media for this procedure. To create this media, follow
the instructions in
If the computer is working and Windows 7 is responding, use these steps to perform a System
Recovery.
1.
Turn off the computer.
2. Disconnect all peripheral devices from the computer except the monitor, keyboard, and mouse.
3.
Turn on the computer.
4. When Windows has loaded, click the Start button, click All Programs, click Security and
Protection, and then click Recovery Manager. If prompted, click Yes to allow the program
to continue.
5. Under I need help immediately, click System Recovery.
6. Select Yes, and then click Next. Your computer restarts.
NOTE:
media that you have created. Insert the first disc or the USB flash drive, select Yes, and then click
Next to restart the computer. If you are using discs, insert the next disc when prompted.
7. When the computer restarts, you will see the Recovery Manager welcome screen again. Under I
need help immediately, click System Recovery. If you are prompted to back up your files,
This procedure will delete all user information. To prevent loss of information, be sure to
or System Recovery when Windows is not responding on page
System Recovery deletes all data and programs you have created or installed. Before you
Creating recovery media on page
If your system does not detect a recovery partition, it prompts you to insert recovery
System Restore on page
System Recovery when Windows is
30.
31.
Restoring and recovering in Windows 7
28.
30.
System
29