Automatically Tuning The Tv; Finding The Video Channel - Sony KV-EH36M31 Service Manual

更多难得资料请到江南家电维修论坛免费下载！
http://bbs.520101.com
Using the TV menu system:
Using the Features menu
1. Press the MENU button on the remote control to display the menu on the TV screen.
2. Press the v or V buttons to select for the 'Features' menu then press B to enter the
'Features' menu.
3. Press the v or V buttons to select the desired menu item then press B to confirm. For
a description of the menu items and their effects, see the table below.
4. Press the v, V, B or b buttons to adjust your selected item.
5. Press the OK button to confirm your choice of setting.
6. Repeat steps 3-5 if you wish to select any of the other items.
7. Press the MENU button to remove the menu from the TV screen.
Menu Item Options/Settings
V Off:
Auto Format* Size of picture does not automatically adjust.
Normal: Size of picture automatically adjusts according to
information from the broadcaster.
v Full:
The TV can automatically adjust the picture size to
eliminate any dark areas on the TV picture.
V Off:
Format Correction** 4:3/14:9 is selected
v On:
Smart mode is selected automatically for 4:3/14:9
Sleep Timer You can select a time after which the TV switches itself into
standby mode.
V Off
.
.
v 90 min
V Off:
Parental Lock Normal
v On:
This feature disables the TV buttons on the top of
the TV set when the set is in standby mode. It is
only possible to switch the set back on by pressing
a button on the remote control.
V TV:
AV2 Output Audio/video signal from the aerial
AV1: Audio/video signal from scart 1***
AV2: Audio/video signal from scart 2
v AV3:
Audio/video signal from connectors on front of TV
V Video:
AV1 Source Video signal input.
v Component:
Component video input (Y, C
V Video:
AV2 Source Video signal input.
v Y/C:
S-Video signal input.
*Only for aerial signal
**Only if 'Auto Format' is set to 'Normal' or 'Full'
***Only if'AV1 Source' is set to 'Video'
14
The Features menu.
C input).
B, R
Installation

6. Automatically tuning the TV

When first switching on your new TV you need to tune in all available channels. The 'Auto Tune' feature automatically searches
and stores all available channels for you. The following instructions and illustrations guide you through this procedure.
1. With the TV set switched on, press the MENU button on the remote
control to display the TV menu system on the TV screen.
Press the v or V buttons on the remote control to highlight the
symbol on the menu screen. Press the B button to enter the 'Set Up'
menu.
2. Use the v or V buttons to highlight 'Auto Tuning'. Press the B
button to start the 'Auto Tuning' procedure. The 'Auto Tuning' menu
appears on the TV screen asking you to confirm that you wish to
automatically tune the TV. Press the OK button to confirm.
3. A new screen is displayed asking you to confirm that an aerial is
connected. Press the OK button to confirm that you have connected
an aerial. The TV starts to automatically search and store all of the
available channels for you. This may take a few minutes - please be
patient and do not press any buttons.
4. Once the TV has tuned all available channels the 'Programme
Sorting' menu appears on the TV screen enabling you to change the
order of the channels on your TV. If you wish to change the channel
order, press the v or V buttons to select the channel you want to
move then press the B button. Press the v or V buttons to select the
new programme number position for your selected channel then press
the OK button to confirm. The selected channel now moves to its new
programme position and the other channels move accordingly. Repeat
this procedure if you wish to sort the order of other channels on your
TV. (For a full explanation of the 'Programme Sorting' menu screen,
please refer to the 'Re-arranging the TV channels' section of this
instruction manual.)
5. Press the MENU button to remove the menu from the TV screen.
6. Press the PROGR +/- buttons or the numbered buttons on the remote
control to view the TV channels.
NOTE: If you would like to stop the 'Auto Tuning' process at any
stage, press the OK button.

7. Finding the video channel

If you have connected a VCR to your TV you now need to find the video channel.
1. Press the PROGR+/- buttons on your remote control until your video picture appears on the TV screen.
NOTE: If you wish to move your video channel to a different programme position, refer to the 'Re-arranging the TV channels'
section of this instruction manual.
Auto Tune menu screen.
Auto Tune menu screen.
Programme Sorting menu screen.
Programme Sorting menu screen.
5