Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Car Navigation system
  5. TREK-520
  6. User manual

Advantech TREK-520 User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
U s e r M a n u a l
TREK-520
Computer

Advertisement

loading

Summary of Contents for Advantech TREK-520

  • Page 1 U s e r M a n u a l TREK-520 Computer...
  • Page 2 Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period.
  • Page 3 Declaration of Conformity This product has passed the CE test for environmental specifications. T est conditions for passing included the equipment being operated within an industrial enclosure. In order to protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage, we strongly recommend the use of CE-compliant industrial enclosure products.
  • Page 4 Caution: This Installation Guide is intended for use by the professional wireless LAN system installer. The device cannot be sold retail, to the general public or by mail order. It must be sold to dealers or have strict marketing control. Warning: It is the responsibility of the professional installer to ensure that the system is used exclusively for fixed, point-to-point operations.
  • Page 5 Visit the Advantech web site at for the www.advantech.com/support latest information about the product. Contact the distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: –...
  • Page 6 Before setting up, check that the items listed below are included, in good condition. If any item does not accord with the table, please contact your dealer immediately. TREK-520 series Computing Box Accessories for TREK-520 Warranty card Power cord: DC power inlet cable Videio in/CAN cable “Drivers, Utilities and User Manual"...
  • Page 7 The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
  • Page 8 Entsorgen Sie Batterien nach Anweisung des Herstellers. Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 T eil 1000 beträgt 70dB(A) oder weiger. Haft ungsausschluss: Die Bedienungsanleitungen wurden entsprechend IEC- 704-1 erstellt. Advantech lehnt jegliche Verantwortung für die Richtigkeit der in diesem Zusammenhang getätigten Aussagen ab.
  • Page 9 Maintenance: to properly maintain and clean the surfaces, use only approved products or clean with a dry applicator. CompactFlash: Turn off the power before inserting or removing CompactFlash storage cards. European Contact information:  Advantech Europe GmbH  Kolberger Straße 7 D-40599 Düsseldorf, Germany T el: 49-211-97477350 Fax: 49-211-97477300...
  • Page 10 Chapter General Information This chapter gives background information on the TREK-520 Computing Box. Sections include: ! Introduction ! General Specifications ! Dimensions...
  • Page 11 Introduction The TREK-520 is a dedicated box computer for industrial, transport trucks, buses and taxis. TREK-520 combined with variety of I/O connectors can be connected to devices like OBD-II or TPMS (Tire Pressure Monitoring System). Dual display/dual audio interfaces supporting different resolutions can deliver different applications to different displays;...
  • Page 12 Hard off delay: Default 30 seconds. When TREK-520 power is controlled by ignition key and turns off by the key (ignition=off), the TREK-520 will cut off the 5VSB power after 30 seconds. In this event when the shutdown process is longer than 30 seconds, the power will be shut down hard, turning off the TREK-520's power and 5VSB.
  • Page 13 (Not including the I/O ports). Enclosure: Ruggedized aluminum without ventilation holes. 1.2.2 Standard PC Functions CPU: TI ARM Cortex-A8 AM3703 800MHz Chipset: Integrated in LE82US15EE BIOS: Award 256 KB Flash BIOS, ACPI 2.0 Compliant. System chipset:. System memory: On board chip up to 1G Serial ports: RS-232, smart Display, WLAN,GPS, WWAN, VIO, USB 2.0, Client Universal serial bus (USB) port: Supports up to three USB2.0.
  • Page 14 High/low temperature: -30 ~ 70° C Relative humidity: 10 ~ 95% @ 40° C (non-condensing) Shock: 30 G peak acceleration (11 msec duration) Certifications: CE, FCC, CCC, Emark, CB. Vibration: 5 ~ 500 Hz SAE J1455 4.9.4.2, MIL-STD-810F 514.5 Dimensions Figure 1.1 TREK-520 dimensions...

  • Page 15: System Setup

    Chapter 2 System Setup This chapter details system setup  on TREK-550. Sections include: ! A Quick Tour of the computer box ! Installation Procedures ! Running the BIOS Setup Program...
  • Page 16 A Quick Tour of the TREK-520 Computing box. Before starting to set up the Computing Box, take a moment to become familiar with the locations and purposes of the controls, drives, connectors and ports, which are illustrated in the figures below. When the Computer box is placed inside truck glove cabinet or under the passenger’s seat next to the driver, its front...
  • Page 17 Chapter 5 to 10 of this manual. Note! The drivers and utilities used for the TREK-520 are subject to change without notice. If in doubt, check Advantech's website or contact our application engineers for the latest information regarding drivers and utilities.
  • Page 18 Chapter 3 Pin Assignments This appendix explains pin assignments on the TREK-520.
  • Page 19 3.1 Front Side Connectors 3.2 Rear Side Connectors...

  • Page 20: Pin Signal

    Smart Display Connector Smart Display Connector Signal Signal Backlight Enable output Panel Power Enable output LVDS Ground Reset Button Input LVDS Clock + LVDS Clock - LVDS Ground LVDS Ground LVDS Data2 + LVDS Data2 - RS232 TXD1 RS232 RXD1 LVDS Data1 + LVDS Data1 - LVDS Ground...
  • Page 21 RS-232 / RS-485 / J1708 Connector RS-232 / RS-485 / J1708 Connector Signal Signal RS-232 RTS9 RS-232 RXD9 RS-232 TXD9 RS-232 CTS9 RS-232 Ground RS-485 D- RS-485 D+ J1708 D- J1708 D+ CAN / Video-In Connector CAN / Video-In Connector Signal Signal CAN_H...
  • Page 22 Chapter 4 Software demo application setup This appendix explains the software demo application for TREK-520. Sections include: ! Introduction ! How to set up demo application...
  • Page 23 2. Click J1939: customer may connect directly to the truck; we use a simulator board below to explain how J1939 protocol can be executed. First, connect to the simulator board to TREK-520 CAN port and console PC, once the simulator is powered on (connect to the truck), you can start...
  • Page 24 Figure 4.2 J1939 truck simulator Figure 4.3 Figure 4.4 TREK-520 User Manual www.advantech.com...
  • Page 25 CAN Test 1. CAN: Console PC, install [PCAN_USB-to-CAN] test program, and use USB to CAN fixture to connect to TREK-520 CAN port. 2. Execute PCAN-View USB→ Set Baud rate 250kBit/s→ Select [Extended]→OK→ Transmit → New → ID(Hex) key in number → Data key in any number→[Period] key in 100ms→Click [Extended Frame]→OK.
  • Page 26 Figure 4. 13 3. Then you may read the data of TREK-520 from Console PC, in the same time, you may also press [Write Data] to write to Console PC. As for Filter Message, it can filter out the message you don’t need, and keep the message you need.
  • Page 27 1. For RTC Time setting: You may set year, month, date, and time show as below. Figure 4.5 Figure 4.6 Figure 4. 7 Figure 4. 8                             www.advantech.com...
  • Page 28 RTC Alarm Setting: You may also set Alarm time; you may wake up the system by the time you have set. Please refer to below figure 4. Figure 6.9 Power Management 4.3.1 Power management Mechanism Normal Power Management Flow ON_DELAY  OFF_EVENT_DELAY HARD_OFF_DELAY Ignition ON  Ignition OFF System OFF System ON  Send Power  Button Signal  www.advantech.com...
  • Page 29 When the HARD_OFF_DELAY is count to zero, the system power is removed abruptly to avoid extra and abnormal power drain from battery. This parameter is fixed with a value of 60 seconds. www.advantech.com After T The system stays off.
  • Page 30 4.3.2 Power Management demo program A. Check the files. Make sure that there are two components include in TREK-520 Power Management Tool. One is “AdvXP_CAN.dll”, another one is “TREK-520 Power Manager.exe”. B. Start up the program Execute Power Management tool and you will see a message box shows “Connect OK”.
  • Page 31 4.3.3 Power Management Parameter settings The parameters for power management on TREK-520 could be set by Demo program (see the image below) or SDK/API. Figure 4.9 power management demo utility Figure 4.9 Off event delay Off Event Delay – it means after 5 seconds delay from receiving of ignition OFF signal, EC controller will send a shutdown event to make system start shutdown process Figure 4.9 Hard Off delay...
  • Page 32 10.147 + 50 x 0.0146 = 10.877 V. Checks which source you’re connecting. DC supply or 12V or 24V battery. Figure 4.9 check 12 or 24 battery Check the ignition signal and see if it’s ON or OFF. www.advantech.com...
  • Page 33 C. Read current status The buttons which indicates by red squares can READ the current status of the system. www.advantech.com...
  • Page 34 Figure 4.9 Read the value D. Set the value The buttons which indicates by blue squares can SET the value you want to the system. www.advantech.com...
  • Page 35 3. Low Delay: When the battery voltage is below certain value you set, it will automatically shut down to prevent the system will consume the battery. 4.3.4 TREK-520 power consumption OS: Windows Embedded Standard Burn-in test V6.0 Idle Mode...
  • Page 36 Therefore, customer can decide how to set the sensitivity value when to trigger G-sensor to send signal to CPU and to back end server through WWAN module. G-sensor is located on the motherboard inside the TREK-520. Please refer the link (http://www.analog.com/static/imported-files/data_sheets/ADXL345. pdf) for the G-sensor datasheet.
  • Page 37 Appendix This appendix explains the TREK-303 detailed information. www.advantech.com...
  • Page 38 Viewing Angle (R/L/B/T) 70° / 70°/ 60°/ 60° Note! The Brightness control is adjusted by the auto light sensor in the front panel as default; it is also defined by button on the front panel by manual. The color LCD display www.advantech.com...
  • Page 39 TREK-303 Specification TREK-303 demo SW application program Figure 6. 17 www.advantech.com...
  • Page 40 5. Hotkey: You may set the hotkey LED light brightness, the value is from 0 ~100. 6. Key Status: When you press Hot key, the status will change from 0 to 7. Key function Definition: You may set the parameter to connect the application program of the hot key. www.advantech.com...
  • Page 41 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2010 www.advantech.com...