Setting Up The Urc-1625; Direct Code Set Up - One for All URC-1625 Instruction Manual

Setting up the URC-1625

Before you start, please read these instructions carefully

Direct code set up

Example: To set up the URC-1625 for your television:
1
2
3
_ _ _ _
4
5
6 Turn your device back on and try all the remote's functions to ensure
they are working properly. If the functions do not work properly,
repeat steps 1-5 using another code listed under your brand.
7 If your device does not respond, follow steps 1 to 5 with
each code listed for your brand. If none of the codes listed
for your brand operate your device, or if your brand is not
listed at all, try the search method described on page 6.
Important notes:
- If your Set Top Box is not a standard BSkyB DigiBox, please follow
the steps above pressing "sat" instead of "tv" during step 2.
- Most Televisions do not switch on pressing the POWER key. Please try press-
ing a "number" key or the "TV-text off" key to switch your TV back on.
- Some codes are quite similar. If your device does not respond or is not func-
tioning properly with one of the codes, try another code listed under your
brand.
- CBL and VAC codes can be set up in "sat" mode.
- Remember to press the correct device key before operating your device.
WWW.ONEFORALL.COM
Find the code for your device in the Code list (page 10 - 23).
Codes are listed by device type and brand name.
The most popular code is listed first. Make sure your
device is switched on (not on standby).
Press the tv key on the URC-1625 for the device you wish
to Set-Up.
Press and hold down the magic key
until the red LED underneath the tv key
blinks twice (the red LED will blink once
then twice).
Enter your (four-digit device code) using the number
keys. The red LED will blink twice.
Now, aim the URC-1625 at your device and
press POWER If your device switches off, the URC-
1625 is ready to operate your device.
x2
5