Table of Contents
Advertisement
Viewing Pictures
Show off your pictures to an audience by connecting your camera to a TV. This section
shows you how to properly connect the camera to a TV and display your pictures on
TV.
Using the Camera in TV Mode
Set the camera to TV Mode
have taken or when you want to erase pictures from the camera memory.
TV Function Contorls
While in TV mode, use the function controls located in front of the camera to properly
set the TV standard, advance forward or backward when viewing pictures, and to erase
pictures.
Note
For details on erasing pictures, see page 25.
Viewing Pictures on your TV
Set the camera to TV Mode
want to use a TV to view the pictures you have
taken.
Connecting the Camera to your TV
Use the video cable comes with the package
to connect the camera to a TV.
1. Connect one end of the video cable to the
video port on the camera.
2. Connect the other end of the cable to the
video input socket nomally at the back of
your TV.
when you want to use a TV to view the pictures you
Press to set the
TV standard
NTSC
Standard
PAL
Standard
when you
Press to go
backward and view
the previous picture
16
Press to
enable Erase
ERASE
mode
/STOP
AUDIO
REC/
PLAY
Press to go
forward and
view the next
picture
TV
VIDEO PORT
Advertisement
Table of Contents
