Technical Data - Clatronic TR 825 Instruction Manual

Transistor-radio
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 15
Power Supply
Connect the power cable supplied (see battery compart-
ment if necessary (5)) to a properly installed 230 V / 50 Hz
safety power socket and the mains connector AC~ (4) on
the back of the machine.
Ensure that the voltage is the same as that indicated on the
model identification plate.
Inserting the Batteries (not supplied)
Open the lid of the battery compartment (5) on the bottom.
Insert 6 batteries of type C/R14 1,5V. Please ensure that the
polarity is correct (see the floor of the battery compartment)!
If the device is not used for a long period of time, remove the
batteries to avoid the spilling of battery acid.
Then close the battery lid.
NOTE:
When a mains cable is connected the batteries are automati-
cally switched off.
CAUTION:
Different battery types or new and used batteries must not
be used together.
Batteries are not to be disposed of together with domestic
wastes. Dispose of the used batteries at the relevant
collection bin or at your dealer's.
WARNING:
Do not expose the batteries to high temperatures or direct
sunlight. Never throw batteries into the fire. There is a danger
of explosion!
Volume
The desired volume can be sent using the VOLUME / regulator (1).
Switching On/Off
Turn the device on by pressing the ON button (10).
Turn the device off by pressing the OFF button (11). Unplug
the device.
Listening to the Radio
1. Select the required frequency band.
Very high frequency (VHF) = FM button (9),
Medium wave (MW) = AM button (8).
2. Tune in the desired station with the station adjustment knob
TUNING (6).
3. For VHF/FM mode pull out the telescopic antenna (2) and
turn it to improve reception.
4. An aerial is integrated into the device for the reception of
AM stations. The machine can be aligned to the station by
turning it.
16
05-TR 825.indd 16
Cleaning and Maintenance
CAUTION:
Do not use abrasive detergents! These can damage the
casing!
Make sure that no humidity or water penetrates in the
device!
Always remove the mains plug before cleaning the machine.
Clean the device only with a soft, dry cloth.
Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Dry well with a dry, soft cloth!

Technical Data

Model: ............................................................................ TR 825
Power supply:
Mains operation: ........................................... 230 V ~, 50 Hz
Battery operation: ........................................ 6 x 1,5 V C/R14
Power consumption: ...........................................................10 W
Protection class: .......................................................................ΙΙ
Net weight: ...................................................................... 1,58 kg
Radio section:
Frequency ranges: ......................VHF / FM 87,5 ~ 108 MHz
......................... MW/AM 530 ~ 1600 kHz
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the
environment and human health.
This will contribute to the recycling and other forms of reutilisa-
tion of electrical and electronic equipment.
Information concerning where the equipment can be disposed of
can be obtained from your local authority.
02.07.2010 13:03:07 Uhr

Advertisement

Table of Contents
loading

Table of Contents