Advertisement
Always wear safety glasses, protective head gear, ear protectors, proper foot wear, work gloves, and oth-
er personal protective equipment when operating hydraulic equipment. Personal protective equipment
must not interfere with the safe operation of the product.
Always use a pressure gauge to monitor the system operating pressure. The gauge must have the same
pressure rating as the pump and torque wrench being used. The incorrect gauge may cause equipment
failure and possible personal injury.
Keep hydraulic couplers clean and free of dirt and debris. Dust and/or sand will damage the seals and
result in equipment failure and possible personal injury.
Before removing or tightening hoses or couplers, ALWAYS fully release the hydraulic pressure in the
system.
NEVER remove or modify any parts of the torque wrench. NEVER adjust the safety valve. Modifying
the torque wrench or adjusting the safety valve could result in equipment failure and possible personal
injury.
NEVER handle pressurized hoses. Oil under high pressure can penetrate the skin, causing serious injury.
Seek medical attention immediately if injured.
For technical assistance or repair service, please contact the nearest authorized EAGLE PRO Service
Center. Service done by non-authorized service centers will void all warranties. EAGLE PRO
INDUSTRIAL TOOLS, INC. has no obligations under any warranty with respect to products that have
been repaired by unauthorized personnel, modified, or damaged through misuse, abuse, accident, neglect,
or mishandling.
DANGER!
REACTION POINT SAFETY
Adjust reaction arm in the same direction as the square drive when possible. Avoid excessive play.
Do not hold torque wrench during operation. If the torque wrench must be held or steadied during
operation, use alternative means of securing tool to the application.
Always ensure that all body parts and clothing are clear of the reaction arm and reaction surface during
use.
EAGLE PRO INDUSTRIAL TOOLS, INC.
4
FORM NO. E10002 REV. A.
Advertisement
