Motorola MILESTONE Instruction Manual page 33

Turn Bluetooth power on or off
Settings
Find it: Menu >
Bluetooth
>
Note: To extend battery life, turn Bluetooth power
off when not in use.
Connect new devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, just turn on the device.
1 Make sure the device you are pairing with is in
discoverable mode.
Note: Refer to the guide that came with the device
for details.
Settings
2 Touch Menu >
Bluetooth settings
>
Bluetooth
3 Touch to turn on and scan. If Bluetooth
power is already on, touch
4 Touch a device to connect.
OK
5 If necessary, touch
0000
(like ) to connect to the device. When the
device is connected, the Bluetooth indicator
appears in the status bar.
Wireless & networks
>
Wireless & networks
>
.
Scan for devices
.
, or enter the device passkey
Note: Using a mobile device or accessory while
driving may cause distraction and may be illegal.
Always obey the law and drive safely.
File transfer
To transfer files you need to pair with the device you
want to send files to, see "Connect new devices" on
page 31. To send a photo to another device:
Media gallery
1 Touch >
2 Touch and hold a photo, then touch
Bluetooth
3 Touch and then the device.
Tip: Flick the notification bar down to see the status of
sent files.
Reconnect devices
To reconnect your phone to a paired device
automatically, simply turn on the device.
To manually reconnect your phone with a paired
device, touch the device name in the
devices
list.
Disconnect devices
To disconnect your phone from a paired device
automatically, simply turn off the device.
.
Share
.
Bluetooth
Bluetooth™ wireless 31