Samsung DCS Technical Manual page 208

SAMSUNG DCS
TECHNICAL MANUAL
MMC 722:
DESCRIPTION:
Allows for the customising of programmable keys on specific electronic keysets on the DCS system. Buttons
1 and 2 are set as CALL buttons by default. Features are entered via the dial pad key by pressing the dial pad
number the required number of steps to select the feature. For example, for OHVA the number 6 is pressed
three times. If a BOSS key is required, press 2 for the first letter B, and then use the UP or DOWN key to
change selection from BARGE to BOSS.
COUNT →
DIAL 2
DIAL 3
DIAL 4
DIAL 5
DIAL 6
DIAL 7
DIAL 8
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
DCS/COMPACT
ACTION
1. Press TRSF 722
Display shows
2. Enter selected station number (eg., 205)
Press UP or DOWN key to select station
number
and press RIGHT soft key to move cursor
3. Enter selected key number (eg., 18)
Press UP or DOWN key to select key
number and press RIGHT soft key to move
cursor
4. Using above chart press the dial pad key
number to make selection
Press UP or DOWN key to make selection
and press RIGHT soft key to advance cursor
to step 5 to enter extender if required or to
return to step 2
Page 208 of 287 Updated I&M
DIAL KEYPAD
1 2
AAPLAY BARGE
DICT DICT
GPIK HLDPK
LCR LCR
MMPA NEW
PAGE REJECT
TG UA
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
OR
OR
OR
Station Key Programming
3
CALL
FAUTO
IOG
LCR
OHVA
SG
VDIAL
DISPLAY
[201] KEY PROG.
01 : CALL 1 →
[205] KEY PROG.
01 : CALL 1 →
[201] KEY PROG.
18 : NONE → _
[201] KEY PROG.
18 : NONE → GPIK_
PROGRAMMING
SECTION
May 2002