Samsung DCS Technical Manual page 185

SAMSUNG DCS
TECHNICAL MANUAL
MMC 705:
DESCRIPTION:
Enables the assignment of system speed dialling numbers. There are up to 500 entries available for
programming depending on system type and allocation of Speed dial blocks in MMC 606.
Each speed dial number consists of a trunk or trunk group access code followed by a separator and up to 18
digits to be dialled. These dialled digits may consist of 0-9, * and #. If the system recognises a valid trunk or
trunk group access number, it will automatically insert the separator.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
"B"
"C"
"D"
"E"
"F"
ACTION
1. Press TRSF 705
Display shows
2. Dial speed index desired (eg., 505)
Press UP or DOWN key to make selection
and
press RIGHT soft key to move cursor
3. Enter access code ( eg., 0/701) plus the
phone
number up to 18 digits (digits will scroll
under)
and press RIGHT soft key to return to step 2
4. Press "F" key to toggle to MMC 706 step 3
to enter name
5. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
RELATED ITEMS:
Page 185 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to insert a flash code "F"
Used to insert a pause code "P"
Used to insert a pulse/tone conversion code "C"
Used to mask/unmask following digits. shows as "[" or "]"
Used to enter name for speed dial bin (see MMC 706)
OR
OR
NONE
MMC 706 SYSTEM SPEED DIAL BY NAME
Assign System Speed Dial
DISPLAY
SYS SPEED DIAL
500:
SYS SPEED DIAL
505:
SYS SPEED DIAL
505: 0-121223456789
SYS SPEED NAME
505:
PROGRAMMING
SECTION
May 2002