Panasonic DMP-UB900 Operating Instructions Manual page 27

∫ Top Menu
Display Top Menu.
∫ Pop-up Menu
Display Pop-up Menu.
∫ Menu
Display Menu.
∫ Reception
The radio wave status during the playback of
DLNA is displayed. (Only when a wireless
connection is used)
Picture Settings
These settings are also displayed by pressing
[PICTURE SETTING].
Picture Settings
Display
During BD-Video playback,
Picture Type
Sharpness Adjustment ent t
these icons switch to the ones
Noise Reduction
Luminance/Colour Adjustment Adjustment
for BD Video content.
Bandwidth Limitation n
24p / 25p Conversion n
Progressive
Reset to Default Picture Settings tur r e Settings
Switch "Set 1", "Set 2" or "Standard" by using
[2, 1].
≥ You can register desired settings to "Set 1" and
"Set 2". Settings for BD Video playback and
settings for the playback of other types of media
are registered separately.
(The default settings for "Set 1"/"Set 2" are the
same as the settings for "Standard".)
≥ You cannot change the "Standard" settings.
∫ Display
Select a setting suitable for your screen.
∫ Picture Type
Select the picture quality mode during play.
∫ Sharpness Adjustment
Adjust the sharpness of images. The greater the
value is, the sharper images will be.
Set 1 Set 1
Normal Normal Normal Normal Normal
Normal Normal
Off Off
Auto Auto
Set 1
∫ Noise Reduction
Reduce unnecessary noise in videos. The
greater the value is, the less noise will appear.
∫ Luminance/Colour Adjustment
Adjust the contrast, brightness, white gamma,
black gamma, colour saturation and hue.
∫ Bandwidth Limitation
Adjust the bandwidth limitations.
∫ Dynamic Range Conversion Adjustment
When connected to a TV that does not support
HDR (High Dynamic Range), this unit outputs
normal dynamic range signals that are converted
from HDR image signals. In this case, set the
maximum image contrast. If you set a smaller
value, their contrast will be reproduced more
faithfully, but the entire screen will appear darker.
To increase the brightness, set a larger value.
∫ 24p / 25p Conversion
Play back videos with film-like motion.
≥ When this unit is connected to a TV compatible
with 4K/24p or 4K/25p:
If "Video Format" (
videos will be output in 4K/24p or 4K/25p.
≥ When this unit is connected to a TV compatible
with 1080/24p or 1080/25p:
If "Video Format" (
"1080i" or "1080p", videos will be output in
1080/24p or 1080/25p.
≥ Noise may appear on the image when you
switch the setting.
∫ Progressive
Select the method of conversion for progressive
output to suit the type of material being played.
≥ If the video is disrupted when "Auto" is selected,
select either "Video" or "Film" depending on the
material to be played back.
∫ Reset to Default Picture Settings
Return "Picture Settings" of the selected tab ("Set
1" or "Set 2") to the factory preset.
29) is set to "Automatic",
29) is set to "Automatic",
27
SQT1293