How To Access The Settings Interface - Linksys N300 User Manual

2. Wait for a solid light
It could take up to a minute for the light on the front of the range extender to stop
blinking.
3. Connect to the range extender
On a computer, phone or tablet, connect to the Wi-Fi network Linksys Extender Setup.
4. Launch setup
Enter http://extender.linksys.com in a browser and follow the on-screen instructions to
set up your range extender.
TIPS
You can also connect the range extender by using Wi-Fi Protected Setup™. For more
•
information, see "Using Wi-Fi Protected Setup" on page 25.
After setup use the extender's settings interface to change any settings. If connected to
•
your range extender go to extender.linksys.com.

How to Access the Settings Interface

After setup use the extender's settings interface to change any settings.
On a computer or device that is connected to your range extender, open any browser
(Internet Explorer, Chrome, Firefox, Safari, etc.), and enter
address bar.
extender.linksys.com in the
23