Philips BDL4221V/00 Service Manual page 87

GENERAL PRODUCT SPECIFICATION
: AC Power switch.
Power SW
3.2.3 Remote control
3.2.3.1 The remote control is used in all PC and TV modes :
I. Be a Monitor:
1. Press Menu Key to call Monitor Menu
2. Press Up/Down/Left/Right Key to select Monitor function
3. Left/Right is Volume Hot Key.
4. Use remote controller to select PC menu function.
II. Be a TV:
1. Press Menu Key to display TV Menu
Press Up/Down/Left/Right Key to select TV function
2.
3. Up/Down Key is Channel Hot Key.
4. Left/Right Key is Volume Hot Key.
Use remote controller to select TV menu function.
5.
III. Recalling from saving mode:
In Monitor power saving mode, which no H&V sync, or no either H-sync or V-sync input via VGA
connector. The monitor will enter Monitor saving mode.
The way to wake up Monitor
when PC H-sync and V-sync have signal again , then Monitor will wake up.
1.
2. press Source key on remote controlà change to Video source directly. "
In TV power saving mode, which switched off by RC Standby key, SLEEP TIMER function
or no TV signal input for 30 minutes, the monitor will enter TV standby mode , and LED
shows amber color.
The way to wake up Monitor
"
1. press . Standby key on remote control to return original Video source
"
2. press Source key on remote controlà change to other Video source directly.
"
Remark :
1. When TV is in saving mode (Amber LED), Power off by rear DC power switch key .
2. When DC re-power on, the set will still stay in saving mode(as previous mode)
42"BDS WXGA TFT LCD Monitor/TV
TYPE
BRAND : PHILIPS
2005-06-10
Freud Yu
"
"
"
:420WN6VB/00
2005-06-10
"
"
"
8639 000 16494
9
45
590
87
420WN6 LCD TV
Go to cover page