Back Panel Layout; Front Panel Layout - PHISON AUDIO PD2 Owner's Manual

PHISON AUDIO
PD2 OWNERS MANUAL

Back panel layout.

The back panel is more or less self-explaining, but we have to note that there are 2 USB connectors. They are not
interchangeable. The USB connector marked "FIRMWARE" is used to upgrade the pre-amplifier firmware and nothing else.
The USB connector marked "USB DAC" is the input from the source. It is UAC2 compliant meaning async transfer.

Front panel layout.

The front panel consist of a centered 4.3" TFT display with touch. All menu settings need to be done on the touch display.
The power button turns the analog stages off to save power when not in use. When doing a FIRMWARE upgrades the
power button is needed to be hold pressed when powering the unit up. The display remains black when in FIRMWARE
upgrade mode. After an upgrade it is necessary to turn the unit completely off and leave it off for 2 minutes before
powering it up again.
In normal use the user should not press the power button during power up.
P a g e 5 | 11