Safety Instructions; Changing Mains Voltage - Authorized Personal Only; General Installation Notes - PHISON AUDIO PD2 Owner's Manual

PHISON AUDIO

Safety Instructions.

When using this product make sure that everything is powered up in right sequence. A good practice is to use the following
sequence for Power ON and Power OFF.
POWER ON SEQUENCE:
POWER OFF SEQUENCE:
Also note that the product has to be configured for the correct Mains voltage. When shipped from Factory the product is
supplied with a label on the bottom of the chassis with the configured mains voltage. 115VAC is the range 100 – 120VAC and
230VAC is the range 220 – 240VAC.
If the fuse blows replace it with 1A Quick Acting 5x20mm fuse. If it happens often, please contact the dealer/factory.
Changing Mains voltage – Authorized personal only.
Changing Mains voltage needs to be done by trained and Authorized personal only. Inside the chassis there is potential
lethal voltages present.

General installation notes.

This device is designed for use in an indoor environment only. Installation is only permitted in an environmental indoor
climate with a temperature of between 0°C and +50°C / 32°F and 122°F, humidity between 25% and 80%, and a
maximum temperature of +50°C / 122°F.
SOURCE->PD2->POWER AMPLIFIER
POWER AMPLIFIER->PD2->SOURCE
PD2 OWNERS MANUAL
P a g e 4 | 11