Installation - Strong STR 650-1000 F+PF User Manual

3. Installation

ATTENTION: Before touching the spotlight surface, be sure that it has not
been working recently due to the high temperatures of the projector while
working because you risk burning yourself. For the same reason, fix the
projector away from inflammable surfaces.
First of all, you must be sure that the distance between the projector and
the closest object in the light beam should be greater than 2 meters.
Otherwise, the object could reach high temperatures which could damage it. It
is also recommended placing the projector at 0,2 meters away from any object
around it. As well, do not put the unit closed to objects which could emit heat
such as heaters and radiators.
The unit is not prepared for working in wet environments (relative humidity
greater than 90%). So it can not work under raining conditions.
It must be positioned for not interfering with its proper ventilation.
This projector is equipped with a handle (see 3 at figure 2) to allow to fast it
at tube structures and surfaces.
The projector handle can be turned and braked by a knob that allows the
proper orientation of the device.
The spotlight must be fixed at a point completely stable and capable of
supporting the weight of the equipment (5,5 kg) via the handle, attaching it to
this point with the anchor holes. Always use M12 steel screws to set the
spotlight.
Once the projector is hanging, vertical inclination can be adjusted by the
lateral fastening knob (see 4 in figure 2). Unscrew it to orientate the projector
and screw it when you consider that the light beam is correct.
User manual STR 650-1000 F+PF 8