Installation - Niles MSU140 Installation & Operating Manual

I
N F R A R E D
Sensor/Keypad Cable
The MSU140 connects to IR sensors and the Intellipad with
category 5 cable, with a maximum cable run of 500'.
Flasher Cable
Niles infrared flashers come supplied with a 10 foot 2-con-
ductor 22 gauge cable. Should you need to extend it, use a
16 gauge 2-conductor cable ("zip-cord"). Shielding is not
necessary for a flasher. Flasher wires can be extended up to
200 feet.
To unswitched
AC Outlet
MSU140
WS100 Sensor
M
A I N
To Niles
IR Flasher
POWER 1 2 3 4 3-30V
AC/DC
+12V DC
STATUS
FLASHER OUTPUTS
IN
MSU140
IR MAIN SYSTEM UNIT
INPUT 1
S U
Y S T E M
To 3-30V AC/ DC power supply
plugged into a switched
AC outlet.Typically found
on back of a receiver.
Figure 6:
MSU140

Installation

MSU140 Sensor
Connection
N I T
TOOLS
REQUIRED
• 1/8" Standard
Slotted
Screwdriver
• Wire Stripper
8