Kaiser Baas BT-220 User Manual page 3

Connecting the BT-220 to an Apple device
The following instructions are for the iPhone, iPod Touch and iPad.
Tap the 'Settings' icon on the home screen then tap 'General'.
Tap 'Bluetooth' and select 'ON'.
To pair the BT-220, press and hold the ID button until you see the green LED
continually flashing.
This will allow the keyboard to be detected.
Your Apple device will detect the keyboard as a 'Bluetooth Keyboard'.
Select 'Bluetooth Keyboard' and then enter the pin code displayed on-screen.
When the code has been verified, the keyboard will connect to your Apple device and
the green LED will stop flashing.
*Please note; some functions of the keyboard are not compatible with your Apple
device.
Connecting the BT-220 to an Android device
The following instructions are for Android phones and tablets. Your Android phone or
tablet must support HID devices. Refer to the user manual included with your device.
To pair the BT-220, press and hold the ID button until you see the green LED
continually flashing.
Tap the 'Applications' icon on your home screen, then tap 'Settings'.
Tap 'Wireless and network', tap 'Bluetooth settings' and tap 'Scan devices'.
Your Android device will detect the keyboard as a 'Bluetooth Keyboard'.
Select 'Bluetooth Keyboard'. You will see a 'Bluetooth pairing request' message
on-screen.
Enter 0000 or 1234, tap the 'OK' button and type the same pair code on the
keyboard, then press the 'Enter' key.
When the code has been verified, the keyboard will connect to your Android device
and the green LED will stop flashing.
*Please note; some functions of the keyboard are not compatible with your Android
device.