Advertisement
Connecting the BT-220 to Windows
If your computer is not Bluetooth enabled, please install the provided Bluetooth USB
receiver to connect to Bluetooth devices -- -
1. Connect the Bluetooth receiver to a spare USB port on your computer.
2. Windows will detect the Bluetooth receiver and the necessary drivers will be
automatically installed.
The Bluetooth receiver is compatible with computers running Windows XP, Vista and
Windows 7 only.
Insert the provided AAA batteries into the BT-220 and slide the power switch
underneath the keyboard to the on position.
To pair the keyboard, press and hold the ID button until you see the green LED
continually flashing.
To add a Bluetooth device, click 'Start' > 'Control Panel' > 'Hardware and Sound' >
'Add a Bluetooth device'.
Windows will detect the keyboard as a 'Bluetooth Keyboard'.
Follow the on-screen instructions to complete connection.
The green LED will stop flashing when connected.
Connecting the BT-220 to your Mac
Insert the provided AAA batteries into the BT-220 and slide the power switch
underneath the keyboard to the on position.
To pair the BT-220, press and hold the ID button until you see the green LED
continually flashing.
Make sure that Bluetooth on your Mac is turned on. Open 'System Preferences'
then select 'Bluetooth' from the 'View' menu. Select the 'On' checkbox.
To set up the keyboard, click 'Set Up New Device' and follow the on-screen
instructions.
The green LED will stop flashing when connected.
Advertisement
