Connections - Niles PSW8 Installation And Operation Manual

Connections

Single Stereo Subwoofer
A four conductor wire (Left+, Left-, Right+
and Right-) 16 gauge or larger is run from
the amplifier location to the local volume
control. (See Figure 4).
Left and Right
Input terminals
PSW8
Satellite Speaker
Figure 4
A Single PSW8 Hook-Up
From the local volume control, the four
conductor cable is run to the PSW8 and
connected to the Input connectors. A two
conductor wire is connected to each of the
stereo outputs and fed to the left and right
speakers. Now, the volume control will
raise and lower the volume for the sub-
woofer and the left and right speakers
simultaneously. Additionally, the crossover
is now connected so that the crossover
switches can be adjusted.
5
Amplifier
Left Right
Left and Right
Output terminals
Satellite Speaker
Dual Subwoofer Systems
A four conductor wire (Left+, Left-, Right+
and Right-) 16 gauge or larger is run from
the amplifier location to the local volume
control. (See Figure 5).
Amplifier
Left
PSW-800 PASSIVE SUBWOOFER Niles Audio Corporation, Inc.
H
SW2
L C
L
C
SW1
H
WF — WF
L + R
Either
Input
PSW800
Satellite Speaker
Figure 5
A Dual PSW8 Hook-Up
From the local volume control, a two con-
ductor cable is run to each of the PSW8s
and connected to either the left or the right
Input connectors.
Each of the satellite speakers must be con-
nected to the correct subwoofer. Typically,
a two conductor wire is connected from the
left channel output on the left channel sub-
woofer and fed to the left satellite speaker
and another two conductor wire connects
from the right channel subwoofer output to
the right channel satellite.
Right
Wire to
Corresponding
Output
PSW-800 PASSIVE SUBWOOFER Niles Audio Corporation, Inc.
H
SW2
L C
L
C
SW1
H
WF — WF
L + R
OK
PSW800
Satellite Speaker